NO HOT WATER? Follow These Simple Tips

Click Here

What are your concepts on How to Troubleshoot and Repair an Electric Water Heater?


Hot Water Heater Repair
Lots of modern-day homes utilize an electrical hot water heater for their heating unit, because of its ease and simplicity of use. Nevertheless, similar to any other electrical appliances, issues might emerge with its usage, suddenly. It can be truly irritating to wake up to a cold shower as opposed to a hot one or having your bath with water that isn't warm adequate or perhaps too hot. Whatever the situation might be, water heater issues can be rather aggravating. Fortunately, we've made a checklist of feasible solutions to your water heater problems. There are a variety of factors that could trigger most of these problems, it could be a problem with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for security. Whatever the trouble is, getting it repaired need to not pose excessive of a problem if you adhere to these steps:

Call An Expert:


If after changing all damaged parts and resetting your temperature, the hot water heater still isn't functioning, you may need to call a specialist plumber for a specialist opinion. The issue with your heating unit could be that the cold and hot faucets have actually been switched over or it might be undersized for the amount of hot water needed in your home. Whatever the situation might be, a specialist plumber would certainly help resolve the issue.

Inspect Your Power Supply:


As fundamental as this might appear, it is really necessary. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water unexpectedly stops working is to confirm that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker tripped. If the breaker is the problem, just turn it on and off once more. Change any broken or damaged fuse. Check the home appliance with power after these changes to see if it's currently functioning.

Inspect Your Thermostat:


If your water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to examine the temperature level settings on your upper thermostat. Make certain the breaker is switched off prior to doing anything. Open up the access panel and also press the red switch for temperature reset over the thermostat. This must help warm the water. Transform the circuit breaker back on and also inspect if the trouble has been resolved.

Examine the Heating Element in the Hot Water Heater:


If it's not a power issue, after that attempt having a look at your burner if it is still working. Test each of your burner to be sure the trouble isn't with any of them. If any one of them is malfunctioning, replace that component and then examine whether the hot water is back on.

Verdict


Water heater problems are not constantly major. Much of them are due to small issues like a blown fuse or damaged heating element. Changing the faulty components should suffice. However, if you are still incapable to solve the trouble, give a call to your nearest plumber to find to get it fixed.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


No Hot Water — Water Heater Repair

Hopefully you enjoyed reading our piece about Hot Water Heater Repair. Thanks for spending some time to read through our blog. Are you aware of someone else who is sincerely interested in How to Troubleshoot and Repair an Electric Water Heater? Take a moment to promote it. Thank you so much for going through it.




Show Details

Leave a Reply

Your email address will not be published. Required fields are marked *